Best current price£18.91from eBay
Shopping.co.uk recommended and popular offers
eBay£18.91Visit shop Bosch Professional Brad SK50 16G 1.2 mm, 16 mm, galvanised 2608200511
Visit shop
B&Q£32.04Visit shop B&Q - Brads For Pneumatic Tools Finish Nail Sk64-20 32G 2608200528
Visit shop23 offers from £18.91 - £97.39
View price history by clicking the chart icon.
1 offer from £17.21
View price history by clicking the chart icon.
For woodworkers and DIY enthusiasts performing finishing tasks, the Bosch 20 Degree 1.6/16g Finish Nails offer a clean, professional look with barely visible heads. Their primary benefit is providing a firm hold for decorative elements and trim, ensuring a polished final appearance. A key consideration is their suitability for indoor use and specific pneumatic nailer models.
| Colour | Silver |
|---|---|
| Model Part Number | 2608200528 |
| Brand | Bosch |
These nails are suitable for a variety of wood types, as well as chipboard and plasterboard, for indoor applications.
These nails are rated for indoor usage class 1 (DIN EN 1995-1-1) and are galvanized for corrosion protection. For prolonged outdoor exposure, a more robust corrosion-resistant fastener may be required.
The primary advantage is their barely visible heads, which allow for easy covering and a clean, professional finish in decorative applications.
These nails have a 20-degree collation angle.
These nails are designed for the Bosch Pneumatic Nailer GSK 18 V-Li Professional.
The wire dimension is 1.6mm, width is 2.8mm, thickness is 1.35mm, and length is 32mm.
They are typically supplied in strips suitable for pneumatic nailers, with specific counts per strip indicated by 'G' or 'NR' in their designation (e.g., 32G).
Ensure you are using the correct nail size and collation angle for your specific Bosch nailer model. Check the nailer's magazine for debris or bent nails. Refer to the nailer's manual for clearing procedures.
Verify the air pressure setting on your pneumatic nailer is adequate for the nail length and material density. Ensure the nosepiece of the nailer is making proper contact with the surface.
Adjust the depth control setting on your nailer to drive the nail slightly below the surface. Ensure the material being fastened is not too hard for the nail to penetrate effectively.
These nails are galvanized for indoor use. If exposed to excessive moisture, rust may occur. Ensure nails are stored in a dry place and used in appropriate indoor environments.
Setup:
To use these nails, ensure your Bosch Pneumatic Nailer GSK 18 V-Li Professional is properly loaded with the correct collation angle (20 degrees) and nail size. Refer to your nailer's manual for specific loading instructions.
Compatibility:
These nails are specifically designed for the Bosch Pneumatic Nailer GSK 18 V-Li Professional. Using them with incompatible tools may result in jamming, damage to the tool, or poor fastening.
Care:
Store nails in a dry environment to maintain the integrity of the galvanized coating. Keep the packaging sealed to prevent dust and moisture contamination. Ensure the nails are handled carefully to avoid bending or damage before insertion.
