Best current price£9.99from eBay
Shopping.co.uk recommended and popular offers
eBay£9.99Visit shop 25mm MDPE Wall Flange 3/4 in BSP Male 19 mm Brass Hose Tail Garden Water Fitting
Visit shop
B&Q£13.99Visit shop B&Q - Back/wall Plate For 25mm Mdpe Water Supply Pipe With A 19mm (3/4")Brass Hose Barb
Visit shop2 offers from £9.99 - £13.99
View price history by clicking the chart icon.
This Akor Wall Flange Kit is designed for users needing a robust and secure connection point for water supply, irrigation, or industrial systems. Its key benefit is providing a versatile, corrosion-resistant, and easy-to-install interface between MDPE pipes and threaded fixtures, allowing for secure wall mounting. A minor caveat is that PTFE tape is not included and must be purchased separately for optimal sealing.
| Model Part Number | WF25KIT053 |
|---|---|
| Brand | Akor |
The kit includes a 25mm MDPE Wall Flange with a 3/4” BSP connection and a 19mm Brass Straight Joiner with a 3/4” BSP connection. It also includes the backplate for wall mounting.
Yes, PTFE tape is required for sealing the threaded connection between the brass joiner and the wall flange, and it is not included in the kit. Hose clamps may also be recommended for securing the hose to the barb.
The MDPE fittings in this kit are rated for PN10, which means they can withstand a maximum pressure of 10 bars (approximately 145 psi).
The wall flange is specifically designed for 25mm MDPE pipes due to its compression fitting. The brass joiner has a 3/4" BSP thread which is standard, but the barb is sized for 19mm hoses.
While brass is generally durable, the suitability for hot water depends on the specific pressure and temperature ratings of the connected hose and MDPE system. This kit is primarily designed for cold water supply and general water transfer.
Clean the exterior of the fittings with a damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the MDPE or brass.
The backplate allows the wall flange assembly to be securely mounted to a solid surface like a wall, fence, or post, providing a stable and accessible connection point for your water system.
Ensure PTFE tape has been applied correctly to the 3/4” BSP threads. Tighten the brass joiner firmly but avoid overtightening. Check the threads for damage.
Ensure the hose is pushed fully onto the barb and secured with a hose clamp (sold separately) if necessary, especially for higher pressure applications.
Ensure the end of the MDPE pipe is cut cleanly and squarely. If the pipe is stiff, warming it slightly with warm water (not hot) can make it more pliable for insertion into the compression fitting.
Use appropriate screws for the mounting surface and ensure they are fully tightened into the screw holes of the wall plate.
Setup:
Compatibility:
Care:
