Best current price£27.95from eBay
Shopping.co.uk recommended and popular offers
eBay£27.95Visit shop Trend Craft Pro C075X1/4TC 4.8mm Radius x 12.7mm Cut Rounding Over Cutter
Visit shop
B&Q£47.23Visit shop B&Q - C075X1/4Tc Guided Rounding Over 1/4" 4.8mm X 12mm Router Bit Cutter
Visit shop11 offers from £27.95 - £50.95
View price history by clicking the chart icon.
This Trend C075X1/4TC router cutter is designed for woodworkers needing to create clean, rounded edges on both curved and straight workpieces without a side fence. Its key benefit is the self-guiding mechanism and dual bearing options for versatile decorative details. A potential caveat is its suitability for lighter roundover work, best matched with smaller routers due to its 1/4in shank.
| Model Part Number | C075X1/4TC |
|---|---|
| Brand | Trend |
Self-guiding means the cutter has integrated bearings that allow it to follow the edge of the workpiece directly, eliminating the need for a separate router fence or template for many applications.
Yes, the TCT tips are designed for use on all timber and timber-based materials, including solid wood, plywood, MDF, and laminates.
The standard roundover uses the primary bearing for a simple curved edge. The quirked Ovolo uses an additional bearing to create a more decorative profile with a small step or 'quirk' before the main curve.
Always observe the 'K' mark on the shank, which indicates the minimum safe insertion depth into the collet. Ensure the router is unplugged when installing or removing the cutter, and always wear appropriate safety gear, including eye protection.
While effective, its 1/4in shank is best suited for smaller routers and detailed work. For extensive, heavy-duty rounding on large projects, a cutter with a larger shank diameter (e.g., 1/2in) and router might be more appropriate.
It's recommended to clean the cutter after each use to remove dust and resin buildup. This will maintain cutting efficiency and prolong the life of the carbide tips and bearings.
The PTFE coating is non-stick and helps to minimize heat and resin buildup on the cutter during operation. This leads to smoother cutting and extends the tool's lifespan.
Ensure the cutter is sharp and free from resin buildup. Check that the workpiece material is suitable and supported. Verify the router's speed is appropriate for the material and cut depth. Ensure the cutter is fully seated and tightened.
Clean the TCT tips and bearings. Ensure the router is set to an appropriate speed. The workpiece may be too hard for the specific radius; consider a shallower cut or a different cutter.
The PTFE coating helps, but if heat is still an issue, ensure you are not forcing the cut. Reduce feed rate or take multiple shallow passes. Clean any resin buildup that may have occurred.
Ensure the cutter is balanced and securely installed. Check that the router collet is clean and not worn. Maintain a consistent feed rate.
Setup: Ensure the router is unplugged before installing the cutter. Insert the shank fully into the router's collet and tighten securely according to your router's manual. Always observe the 'K' mark on the shank for the minimum safe insertion depth. For bearing-guided cuts, ensure the correct bearing is fitted and that the workpiece edge is smooth and free of debris.
Compatibility: This cutter features a 1/4in shank, making it compatible with any router equipped with a 1/4in collet. It is particularly effective with smaller handheld routers or trim routers.
Care: After use, clean the cutter thoroughly to remove any wood dust or resin buildup. A soft brush or a cloth lightly dampened with a wood cleaner can be used. The PTFE coating helps minimize buildup, but regular cleaning ensures optimal performance and longevity. Store the cutter in its protective packaging or a suitable bit organizer to prevent damage to the cutting edges and bearings.
