Best current price£14.81from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£14.81Visit shop Rust-Oleum Ae0040002e8 Crystal Clear Semi Gloss Protective Top Coat 400Ml 5013296950107
Visit shop2 offers from £14.81
View price history by clicking the chart icon.
This Rust-Oleum Crystal Clear Semi Gloss Protective Top Coat is designed for DIYers and homeowners looking to add a durable, clear protective layer to various surfaces. Its key benefit is providing a non-yellowing, semi-gloss finish that seals and protects against wear. A potential caveat is its specific coverage rate, requiring careful calculation for larger projects.
| Colour | Black |
|---|---|
| Model Part Number | L1S15L100020S000329695010 |
| Brand | Rust-Oleum |
The surface will be dry to the touch in about 15-30 minutes, but it requires 24 hours for a full cure and optimal hardness.
Yes, it provides durable protection suitable for many outdoor applications, but it is not a primary outdoor sealant against harsh weather for unpainted wood.
The coverage rate is approximately 2 square meters per liter, depending on the surface porosity and application thickness.
No, it is designed to be crystal clear and non-yellowing, preserving the original color and finish of the surface while adding a semi-gloss sheen.
Yes, it can be applied over previously painted surfaces, provided they are clean, dry, and in good condition. Test compatibility first.
After use, turn the can upside down and spray for a few seconds to clear the nozzle. Store in a cool, dry place away from direct sunlight and heat.
Shake the can more frequently during use. Ensure the nozzle is not clogged; if it is, clean it with a solvent or replace the can.
You may be holding the can too close to the surface or applying the paint too heavily. Apply in thin, even coats from the recommended distance.
Ensure the surface was properly cleaned, dried, and free of contaminants like oil or wax. Check for compatibility with the underlying material.
While designed to be non-yellowing, extreme environmental conditions or incompatible underlying materials can sometimes cause discoloration. Ensure proper application and consider the surface's exposure to direct sunlight.
Setup:
Compatibility:
This top coat is suitable for use on wood, metal, plastic, plaster, masonry, and previously painted surfaces. Always test on an inconspicuous area first, especially on plastics, to ensure compatibility.
Care:
Allow 24 hours for the coating to dry thoroughly before exposing to heavy use. Clean surfaces with a mild soap and water solution using a soft cloth. Avoid abrasive cleaners or solvents, as these can damage the finish.
