M14 x 1.5mm Thread Repair Kit - AB Tools - AN025

This kit works best on softer materials such as aluminum and other alloys where thread damage is common. It can be used on a wide variety of materials where an M14 x 1.5mm thread is required.

A Helicoil insert is a thread repair coil made of stainless steel. It is designed to be installed into a tapped hole to provide a stronger, more durable thread.

The kit includes the correct drill bit. Refer to the instructions for specific drill bit sizes for different materials. Always use the specified drill size for optimal results.

While the kit can be used on harder materials, it is primarily designed for softer metals. You may need a more robust tapping solution for hardened steel.

Use a specialized Helicoil extraction tool, or carefully extract it using a pick or small screwdriver to lift the insert from its threads. Be careful not to damage the surrounding material.

The lug breaking punch is used to remove the installation tang from the Helicoil insert once it's installed. This ensures a flush finish.

Use a high-quality cutting oil suitable for metal tapping. This will help reduce friction and prevent damage to the tap and the workpiece.

Ensure the tap has created a clean thread and that the insert is aligned correctly with the installation tool. Check for any debris in the tapped hole.

Ensure the correct installation tool is used and that it's in good condition. Reduce installation force. If necessary, use a new insert.

Ensure the correct size insert was used. Check that the tapped hole is deep enough to accommodate the insert. If the base material is severely damaged, the repair may not be effective.