Best current price£72.36from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£72.36Visit shop Led D2s / D2r Canbus Bulb 2 Pcs, New, Homologation 8000Lm 5904865406609
Visit shop1 offer from £72.36
View price history by clicking the chart icon.
The motoLEDy 1222 LED Headlight Bulbs are ideal for automotive enthusiasts looking to replace standard D2S or D2R xenon lamps with a brighter, more efficient lighting solution. These bulbs offer a significant 60% increase in brightness and a clean 5500K Xenon White color temperature, providing improved visibility and a modern aesthetic. However, users should note that these bulbs are intended exclusively for off-road use and lack official certification for public road traffic.
| Model Part Number | 1222 |
|---|---|
| Brand | motoLEDy |
No, these bulbs are intended for off-road use only and do not have official road-legal certification for public traffic.
Yes, these are designed as a direct replacement for D2S and D2R xenon bulbs.
No, these are designed as plug-and-play replacements, though the adjustable tilt may require manual tuning once installed.
These provide up to 60% more brightness than standard xenon lamps with a luminous flux of 8000lm per bulb.
The bulbs output a Xenon White light at approximately 5500K.
They are rated for a lifespan of 50,000 hours.
While the built-in CANBUS handles most errors, you may need an additional external load resistor if your vehicle's system is highly sensitive.
Use the adjustable tilt angle feature on the base of the bulb to rotate it slightly until the beam pattern aligns correctly with your headlight housing.
Ensure all electrical connections are tight and that the bulb is receiving full, stable voltage from the vehicle's headlight harness.
Installation of the 1222 series follows standard bulb replacement procedures for D2S/D2R housings. Ensure the vehicle is powered off and the headlights are cool before beginning.
While the integrated CANBUS system works for most vehicles, some highly sensitive electrical systems may still require additional decoders. Handle the LED chips with care and avoid touching the glass/lens surface with bare fingers to prevent oils from affecting the light quality.
