Tamiya PS-14 Copper Polycarbonate Spray Paint 100ml
Best current price£5.59from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£5.59Visit shop Tamiya Lexan Spray Paint - PS-14 Copper TAM86014
Visit shopeBay£5.59Visit shop All Offers
3 offers from £5.59 - £14.95
View price history by clicking the chart icon.
TAMIYA PS-14 Copper Polycarbonate Spray Paint 100ml Lexan RC Car BodyFree delivery in 1–3 days£14.95Visit shop →
OnBuy.comTamiya Ps-14 Copper Polycarbonate Spray Paint 100Ml Lexan Rc Car Body
Free delivery in 1–3 days
£13.95
Visit shop
Product Information
Full details
This Tamiya PS-14 Copper spray paint is designed for R/C enthusiasts looking to customize transparent polycarbonate bodies. Its key benefit is providing a durable, fuel-resistant finish for both electric and gas-powered R/C cars. A notable caveat is that it cannot be shipped outside mainland UK due to shipping regulations. This paint offers vibrant color, easy application, and lasting adhesion specifically formulated for the unique demands of R/C car modeling.
All features
| Brand | Tamiya |
|---|
Extended Product Information
FAQs
Can I use Tamiya PS-14 Copper paint on regular plastic models?
No, Tamiya PS-14 Copper spray paint is specifically formulated for transparent polycarbonate R/C car bodies only. It is not designed for use on conventional plastic model kits and may damage or fail to adhere properly.
How should I apply the paint for the best results?
Shake the can well. Hold it about 30cm (12 inches) away from the *inside* of the polycarbonate body and apply in thin, even coats. Allow each coat to dry slightly before applying the next.
Is this paint safe for use on nitro R/C cars?
Yes, these paints are impervious to oil and fuels, making them safe for use on both electric and gas-powered (nitro) R/C cars.
What is the shipping restriction for this product?
Due to new post and airfreight regulations, Tamiya spray paints like PS-14 Copper cannot be shipped outside mainland UK.
How do I clean up if I get paint on unintended surfaces?
For fresh overspray on surfaces, you can often use Tamiya thinner or isopropyl alcohol immediately. However, be cautious as these solvents can also damage some plastics. Always test in an inconspicuous area first.
What is the recommended way to mask for multi-color designs?
Use high-quality masking tape designed for hobby use. Ensure the tape adheres firmly to the polycarbonate surface and remove it carefully after the paint has dried but before it fully cures to avoid peeling the paint layer.
Does the inside application affect the look of the paint?
Applying from the inside protects the paint finish from external damage. The color will appear slightly different from the outside compared to a paint applied externally, but it is designed to maintain its vibrancy and finish through R/C use.
Troubleshooting
Paint is spraying unevenly or sputtering
Ensure the can is thoroughly shaken. Clean the nozzle by inverting the can and spraying briefly. If the nozzle is clogged, gently clean it with a solvent (like Tamiya thinner, used cautiously) or replace the nozzle if possible.
Paint is running or dripping
You are likely holding the can too close to the surface or applying the paint too heavily. Maintain a consistent distance of about 30cm (12 inches) and apply in thin, even coats. Allow adequate drying time between coats.
Poor adhesion or paint peeling
Ensure the inside of the polycarbonate body is clean and free of oils, grease, or mold release agents. Wash with mild soap and water, rinse thoroughly, and dry completely before painting. The surface must be clean for proper adhesion.
Color not as expected
The final color can be influenced by the base color of the polycarbonate body and the number of coats applied. For the most accurate representation of Tamiya PS-14 Copper, ensure sufficient coats are applied to opaque the underlying material. Applying over a black or dark base inside the body will result in a richer copper appearance.
Pros and Cons
Pros
- Specifically formulated for polycarbonate, ensuring proper adhesion and flexibility.
- Fuel and oil resistant, ideal for gas-powered R/C cars.
- Easy to apply with a spray can for even coverage.
- Durable finish protects against minor impacts and scratches when applied internally.
- 100ml can size is convenient for single-body projects.
Cons
- Cannot be shipped outside mainland UK.
- Strictly for polycarbonate R/C bodies; not for use on plastic models.
- Requires application from the inside of the body, which can be challenging for beginners.
- Limited color options within the PS-14 designation (this specific product is copper).
Setup, Compatibility & Care
Compatibility: Tamiya PS-14 Copper paint is exclusively designed for transparent polycarbonate R/C car bodies. It is not suitable for use on standard plastic model kits or other materials. Always ensure the R/C body is made of polycarbonate before use.
Setup: Shake the can vigorously for at least one minute before use. Ensure the work area is well-ventilated and protected from overspray. Paint the body from the inside, holding the can approximately 30cm (12 inches) away from the surface.
Care: Once the paint has fully cured, the finish is generally durable and resistant to fuel and oil. However, avoid abrasive cleaners or solvents on the exterior surface. If the body sustains damage, repairs or touch-ups must be done from the inside. Store the can in a cool, dry place away from direct sunlight and heat. Ensure the nozzle is clean after use by inverting the can and spraying briefly.
Important Note: Due to new post and airfreight regulations, Tamiya spray paints, including PS-14 Copper, cannot be shipped outside mainland UK.