Draper Ratcheting Tie Down Straps - 4.5m x 25mm

The product information does not specify a maximum load capacity (SWL or break strength). Always use common sense and ensure the straps are appropriate for the weight and nature of the load being secured. Avoid using for excessively heavy items.

Tighten the strap until it is snug and the load is secure. Listen for any signs of stress on the load or strap. Avoid excessive force, especially with delicate items. The goal is to prevent movement, not to crush the item.

Yes, the straps are suitable for use in various weather conditions. However, prolonged exposure to moisture and then drying may affect the material over time. Ensure they are dried properly after use if exposed to significant moisture.

The ratchet mechanism is manufactured from steel with a protective plating.

Each strap is 4.5 meters in length and 25mm in width.

Each set includes four ratcheting tie-down straps.

The 'S' hooks are dipped metal.

Ensure the strap is threaded correctly through the ratchet mechanism and that the ratchet lever is moving freely. Check for any obstructions in the ratchet.

Push the release lever on the ratchet mechanism fully down while pulling the strap. If it is stiff, ensure no dirt is impeding the mechanism.

Clean the ratchet mechanism with a dry brush or compressed air. A light application of a dry lubricant (like silicone spray) may help, but avoid oily lubricants which can attract dirt.

Ensure the anchor point is accessible and clear. The 'S' hook design is intended for secure loops and bars; use appropriate attachment points.